HG 1/144 AGE-1S Gundam AGE-1 Spallow

Here is my latest finish work that request from one of the BPG Member. A Custom Paint of Spallow. So, nothing much i'm gonna say here just sharing some photo taken and sure yes, your compliment are welcome too.

HG 1/144 AGE-1S Gundam AGE-1 Spallow

HG 1/144 GSX-401FW Stargazer Gundam

Another completely done kit, GSX-401FW Stargazer Gundam, Nothing much special with this kit but just the design and its not easy to get this model as well. Anyway, enjoy the photo :)

HG 1/144 GSX-401FW Stargazer Gundam

HG 1/144 Verda Buster Gundam

Holiday started! More time for plamo. LOL~ Ok here, today i'm sharing this HG 1/144 scale of Verda Buster Gundam from Stargazer series. What i've done with this kit are,.. Straight Build with Lining applied then some effect or weathering on the kit's armor using Gundam Marker Pen (Sliver) only. And also some Custom Print Decal for 144 Scale use then lastly and always do the very last step is to Flat/Matt Coating (Top Coat). So now here you go enjoying viewing the photo. Your compliment are always welcome.

GAT-X103AP Verda Buster Gundam

WIP: HG 1/144 Gundam Astraea

And today, I only manage to share one of the photo that i have taken so far since last week. And the photo show below are what i've done lately which i mixed the parts from a China Brand named "LoongOn" and the model name is "Lv Bu Armoured" 吕布机甲. So, what say you while view this photo? Your compliment are welcome. :D 

That's all for today sharing. Thanks for dropping by..

Some Works In Process!

Alright! nearly a week time i didn't updated my blog and today, I gonna share some work that i have done within this few days. So enjoy viewing the photo below.

HG 1/144 Gundam Astraea

In Process!

BPG Gathering!

On 9th & 10th December, 2011. 2 days of BPG Gathering was held at The Arch "Taurean Cafe" in Gadong & D'April Cafe in Kiulap. And YES, some of them managed to bring their awesome straight build kits & painted kits. So lets the photo entertain you from now on.

9th December, 2011 - The Arch "Taurean Cafe" in Gadong

HGUC 1/144 FA-78-3 FULLARMOR GUNDAM 7TH

Getting lazy day by day for updating my blog but still i have to do it once or twice a week time. Ok here i'm sharing my current complete build of kit called HGUC 1/144 FA-78-3 FullArmor Gundam 7th and again i'm using Gundam Marker Pen only for touch up detail and seen like i'm stuck by using marker pen... lol~ After this i might try some other material, so right now do enjoy view the photo.

HGUC 1/144
FA-78-3 Full Armor Gundam 7th

RJ London "Dull Lacquer"

HG 1/144 GAT-X103 Buster Gundam

This time i've been ask to build this remaster kit GAT-X103 Buster Gundam with some add-on and simple.

HG 1/144 GAT-X103 Buster Gundam

MG 1/100 RMS-106 HI-ZACK

Today, i'm sharing my currently complete work done, that is MG 1/100 RMS-106 HI-ZACK. Sorry, nothing much to say in here just photo. Do enjoy viewing them all.

Model Comprehend FA-93 HWS (Short Preview)

FA-93 HWS GUNDOOM, finally arrive here in BRUNEI. 10 Units available for local modelers including me myself as well. Model Cpmprehend the MC is more better quality then TT HongLi and "No" headache with snap-fit work process too.

FA-93 HWS GUNDOOM

AMX-107 'BAWOO'

HGUC 1/144 Scale

AMX-107 'BAWOO'

Neo-Zeon Attack Use Transformable Mobile Suit

HGUC 1/144 RGM-79 Powered GM

Here another straight build with some touch up detail using marker pen. This is to encourage our Local newbie to  get to know on how to mod their kit with some simple method while they doesn't know how to use spray paint or doesn't have an airbrush. Ok less talk & more photo...

HGUC 1/144 RGM-79 Powered GM

Model Comprehend (MC) RX-93-2 Hi Nu Gundoom

And again another MC model kit the RX-93-2 Hi-Nu Gundoom. A straight build, touch up and a little color spray on booster.

Model Comprehend (MC) SD MSA-0011[EXT]EX-S

Model Comprehend (MC) SD MSA-0011[EXT]EX-S

HG 1/144 GN-000 0 Gundam

Simple Straight Build on this HG 1/144 Scale of GN-000 0 Gundam with some add-on Luminous Transfer Sticker (Grow In The Dark).. and some touch up with Gold Maker Pen. 

Straight Build: MG 1/100 Scale F91 Gundam

While waiting for the water decal to arrive from Hong Kong "SamuelDecal" for RX-78-2 Gundam. So I decide the times on this MG 1/100 Scale of F91 Gundam. "Simply the Best" just straight build then touch up with gold maker pen then dry decal on, lastly "flat' top coat to protect the dry decal.

Complete: RX-78-2 Gundam Ver.One Year War 0079

Finally I complete done this RX-78-2 Gundam Ver.One Year War 0079 as in "Brunei Ver." Nothing much to talk about just let  the photo do the speech!

MG RX-78-2 Gundam (Brunei .Ver)

WIP: RX-78-2 Gundam Ver.One Year War 0079 Pt.1

HGUC 1/144 AMS-129 Geara Zulu Pt.2 (Complete)

Nothing much, just apply flat black & touch up some detail on its backpack & rifle/cannon

HGUC 1/144 AMS-129 Geara Zulu Pt.1

Just a straight build process on this HGUC 1/144 AMS-129 Geara Zulu (Angelo Sauper Use) Neo Zeon Mobile Suit from Unicorn Series. Enjoy the normal photo below.

 

HG 1/144 Gundam AGE-1 Normal Pt.2 (Complete)

Completely done on Gundam AGE-1 Normal. Addition of IC Socket and Water Decals which left over the i bought at samueldecal.com. So enjoy the photo...

Tamiya 1/12 Antena 3 Yamaha Team D'antin YZR500'02

Yup, expanding plamo(Plastic Model or Plastic Modeler) work... This was process last night using hand brush to apply the acrylic paint on for more detailing.

HG 1/144 Gundam AGE-1 Normal Pt.1

The new release kit, Gundam AGE-1 Normal

1/72 Macross VF-25F TornadoMessiah

Today, i'm sharing my current interruption project on a half way done of work from one of my friend. Only photo sharing at the moment, so enjoy the photo.

 

Group Build - 1/144 HG RGM-96X Jesta Complete!

Alright! finally RGM-96X Jesta is complete and is finished using DPI Anchor Spray Paint "Clear" instant of Mr.Hobby Top Coat Flat.

Enjoy the photo...

Group Build - 1/144 HG RGM-96X Jesta (Preview Only)

Group Build - 1/144 HG RGM-96X Jesta Pt.2.5

Busy 3rd Semester! not the subject/course but the time schedule. And i manage to do some of it for this GB HGUC 1/144 RGM-96X JESTA. Not much photo taken but just only "ONE" for today. >.<

Group Build - 1/144 HG RGM-96X Jesta Pt.2

One word "Tired"... Cause 3rd Semester started and Time Table schedule 180'degree change! "So Little Time to share from now but will still maintain what i got right now and keep on upgrading for sure.

Okay~ Group Build (GB) RGM-96X "JESTA"... nothing much special in this post, just a few part is painted.

Two Metal Rod Antenna added onto the backpack

Group Build - 1/144 HG RGM-96X Jesta

Today, I just got my Jesta from HLJ and yet I'm still out of idea for this RGM-96X Jesta Group Build by MVPFigure. Anyway, times goes and idea would came across.

TT HongLi - Sinanju Pt.4

Question. Why i directly apply the color without removing the parts from the runner. cause i'm going to try the other way round and feel how was the work process does it's easy or hard to do so. 

And here below the photo as u can see the color is in Orange! yup it's Orange.... cause i didn't even apply any primer on the surface and the original color of the kit is Red.. and the color that i use is "Anchor Chrome Yellow".. so enjoy the photo..

1st Layer w/o Primer or anything (Out from the plastic bag straight apply the color)

TT HongLi - Sinanju Pt.3

Today post is about the inner frame of sinanju which i see below is just 1 layer of Anchor "Sparkling Sliver" spray apply.

TT HongLi - Sinanju Pt.2

Here I've completely done the Inner Frame of Sinanju (TT HongLi), the reason i bought this bootleg is, i need some of the parts for my early Bandai Sinanju. Ok enjoy the photo :p although its not something special right now.

TT HongLi - Sinanju

Since having itchy hand while waiting for "Jesta", plan to do this in a slow process. Yes, it's TT HongLi and why i bought the fake kit instant of the Original from Bandai? Because of the price differences and i'm using this as for my 3rd Customize kit which combine with my previous Bandai Sinanju and the rest of the parts will goes with TT Unicorn.. Lots of Idea in my crazy brain. :)

Sound Activated GN Drive !!!

Today, I receive my order from HobbyMate, and this is what i've completely done on my GNX-603T. 

1x Sound Activated Kit with 2x Micro Leds (RED) for lighted up front & rear (Both Side) of GN Drive. I did share a short video clip below. Enjoy it.

Sangokuden - Hong Lian Zhuang Cao Cao

Today, i'm gonna share this "Sangokuden" from Bandai, and this is my 1st Sangokuden's Kit name "Hong Lian Zhuang Cao Cao" and the horse name "Jue Ying". I bought this at our local store "Toys'R'Us" around B$34.90.

This kit came with a short storyline and behind its the instruction of assembly. 

shortcut~straight to my work done in just a few hours :)

the weapon need to apply paint and the awesome is the effect of the weapon.

Thanks for viewing :)

Work In Process - GNX-603T GN-X (Pt.2)

Ok, now back to GNX-603T GN-X. And this kit is 90% done till today, here are some WIP photo of GN-X.

NZ-666 KSHATIRYA (Pt.5) Final

Today managed to finish this kit in 95% done and yes that's all i done on this kit, added some decal on kshatriya since this kit doesn't have much decal came with the box itself and the decal i use from many other type of kit's decal which left behind. And final work, for sure is to apply 1 or 2 layer of "Top Coat".

NZ-666 KSHATIRYA (Pt.4)

Nothing much to say, just photo... enjoy!

NZ-666 KSHATIRYA (Pt.3)

Here you can see, i add-on PINs on the wings and Gunmetal for the inner frame.

NZ-666 KSHATIRYA (Pt.2)

Hi, More photo then reading :) Enjoy!

NZ-666 KSHATIRYA

Today, i'm sharing my currently work on this HG 1/144 NZ-666 KSHATRIYA and this kits belong to our group member name "Vicky Goh", yeah same surname as mine :) but she not my cousin just friend :p Ok, i shall keep speechless and start showing my photo of work.

The Process of Short Project

1st, you can get this kind of rubber joint which left behind after you have totally complete your lovely kit. So below the photo show 2 kinds of rubber joints, and the red circle show that's the kind of joint i use for funnel.

In this photo show before & after of the funnel. check on the circle parts